air conditioning tools equipment

WILMAR W88001 LOCK RING PLIERS Feature

• Removes lock rings on brakes, clutch shafts, transmissions, master cylinders etc.
• Spring loaded jaw
• Vinyl grip handles
• Knurled outer tips hold rings securely

WILMAR W88001 LOCK RING PLIERS Overviews

Removes lock rings on brakes, clutch shafts, transmissions, master cylinders, etc.

Spring loaded jaws.

Vinyl grip handles.

Knurled outer tips hold rings securely.

*** Product Information and Prices Stored:Mar 09, 2010 02:51:24

Riveters

Interdynamics GGH-2 Air Conditioning High Side Glycerin Filled Manifold Replacement Gauge – Pack of 1 Feature

• R-134a glycerin filled manifold gauge replacements
• High side gauge
• Fits IDQ MF-134 and MG-134
• Professional grade

Interdynamics GGH-2 Air Conditioning High Side Glycerin Filled Manifold Replacement Gauge – Pack of 1 Overviews

Interdynamics ACPRO Air Conditioning High Side Glycerin Filled Manifold Replacement Gauge is a high side glycerin filled air conditioning replacement gauge for MF-134 and MG-134 manifold sets.

*** Product Information and Prices Stored:Mar 08, 2010 12:08:03

utility knives potholders oven mitts asian knives

Waterloo TR51203 26-Inch Wide by 12-Inch Deep by 12-1/4-Inch High Professional Use Red 3 Drawer Intermediate Chest with Full Extension Ball Bearing Drawer Slides Feature

• Full-extension ball-bearing drawer slides for complete tool access
• Fits between any 26″ wide chest and cabinet
• Sidewall post construction provides extra rigidity

Waterloo TR51203 26-Inch Wide by 12-Inch Deep by 12-1/4-Inch High Professional Use Red 3 Drawer Intermediate Chest with Full Extension Ball Bearing Drawer Slides Overviews

Boxes Cases – Tool Storage Type: Intermediate Chest Number of Drawers: 3 Width: 26-3/32 Depth: 12 Height: 12-5/16 Material: Steel

*** Product Information and Prices Stored:Mar 07, 2010 22:38:38

Safety

Universal Clutch Holding Tool Overviews

Features and Benefits:

• This universal clutch holding tool is an adjust to fit tool for holding the A/C compressor clutch when removing or installing the center nut

One size fits all A/C compressor clutches. This universal clutch holding tool should adjust to fit most A/C compressor clutches to facilitate installation and removal.

*** Product Information and Prices Stored:Mar 07, 2010 11:22:09

Antitheft Rim Screws

I had bought a cheap set of flare wrenches on Amazon. Those would have worked fine, except they were too long. I ended up buying these because I needed the 13mm to be about 5 inches long (Your mileage may vary depending on the situation).

I’m no expect in tool design, but seems like for this type of wrench, shorter is acceptable as that type of nut shouldn’t be torqued down so hard it takes a lot of leverage to remove it…

I will also say these were much more comfortable to use than the cheaper ones as well.

SK 373 SuperKrome 3 Piece 6 Point 10-Millimeter to 14-Millimeter Flare Nut Wrench Set Feature

• Three metric flare-nut wrenches made in the United States
• Patented SuperKrome finish for durability and maximum corrosion resistance
• SureGrip hex design drives the side of the fastener, not the corner
• Packaged in a convenient roll
• Wrenches measure 9mm-by-11mm, 10mm-by-12mm, and 13mm-by-14mm

SK 373 SuperKrome 3 Piece 6 Point 10-Millimeter to 14-Millimeter Flare Nut Wrench Set Overviews

Item #: SKT373.

Features & Benefits:

• Made in the U.S.A., featuring quality workmanship and value.
• Wrench box ends feature S-K’s patented SureGripr hex design, which drives the side of the hex, not the corner.
• High polish SuperKromer plating results in a jewelry-like finish, providing long life and maximum corrosion resistance.
• Contains: 9mm x 11mm, 10mm x 12mm, 13mm x 14mm Wrenches. Packaged in a roll.

Customers also search for: Discount 3 Piece Metric Hi Polish Flare Nut Wrench Set, Buy 3 Piece Metric Hi Polish Flare Nut Wrench Set, Wholesale 3 Piece Metric Hi Polish Flare Nut Wrench Set, 025141003734, ToolWeb, Air Conditioning Line Tools

SK 373 SuperKrome 3 Piece 6 Point 10-Millimeter to 14-Millimeter Flare Nut Wrench Set Specifications

The SK Hand Tools 3-Piece Superkrome Metric Flare Nut Wrench Set features a lustrous SuperKrome finish that provides long life and maximum corrosion resistance by protecting the wrenches from harsh working conditions. The SureGrip wrenching design drives the side of the hex of the fastener rather than the corner to increase torque and avoid edge breakage, especially on rusted or damaged fasteners. Additionally, rounded handle edges improve grip and add comfort. This 3-piece set comes packaged in a roll.

What’s in the Box
9mm-by-11mm, 10mm-by-12mm, and 13mm-by-14mm wrenches.

SK 373 SuperKrome 3 Piece 6 Point 10-Millimeter to 14-Millimeter Flare Nut Wrench Set CustomerReview

I had bought a cheap set of flare wrenches on Amazon. Those would have worked fine, except they were too long. I ended up buying these because I needed the 13mm to be about 5 inches long (Your mileage may vary depending on the situation).

I’m no expect in tool design, but seems like for this type of wrench, shorter is acceptable as that type of nut shouldn’t be torqued down so hard it takes a lot of leverage to remove it…

I will also say these were much more comfortable to use than the cheaper ones as well.

*** Product Information and Prices Stored:Mar 06, 2010 14:56:08

Ignition Parts lcdtv Running Boards & Steps

Robinair 15150 VacuMaster 1.5 CFM Vacuum Pump – 2 Stage Feature

• Package Quantity: (1) Unit
• Displacement CFM: 1.5
• Micron Rating: 50
• Oil Capacity (Oz.): 7.4
• Number of Stages: 2

Robinair 15150 VacuMaster 1.5 CFM Vacuum Pump – 2 Stage Overviews

VacuMaster 1.5 CFM Vacuump PumpFeatures: Oil Fill Port – Makes adding oil simple since the port is accessible from the front of either side. The sight glass on the front of the pump shows you when enough oil has been added. Heavy-Duty Motor – High torque design for easy startup and efficient operation. Two-Stage Design – Cleans the system more thoroughly than a single-stage pump; the second stage starts pumping at a lower pressure so you can pull a deeper, ultimate vacuum. Die-Cast – Cast aluminum housings make the pumps lightweight but durable. Oil Drain Valve – Positioned at the bottom of the oil reservoir and angled for faster, more complete draining. Specifications:Free Air Displacement: 1.5 CFM Factory Micron Rating: 50 microns No. of Stages: 2 Intake Fitting: 1/4″ MFL, 3/8″ MFL, 3/8″ FFL x 1/2″ ACME adptr. Oil Capacity: 7.5 oz. (220ml) Motor Size: 1/4 hp Voltage: 115V 60Hz Approvals: UL Weight: 21 lbs. (12.5 kg) Dimensions: 9.5″ H x 4.5″ W x 12.5″ L (240mm x 120mm x 315mm)

*** Product Information and Prices Stored:Mar 06, 2010 02:12:23

trash compactors

Robinair (ROB60072) 72″ R-134 Hose Set Overviews

Features and Benefits:

• 6′ long replacement hoses for R-134A manifold gauge sets
• Reaches further than standard 3′ hoses
• 1 each color-coded red, yellow and blue hose

Longer than standard 72″ set of hoses for R-134A gauges and A/C machines.  Replace your short or leaking hoses with this set of 3 color-coded hoses.

*** Product Information and Prices Stored:Mar 05, 2010 15:06:11

Air Fresheners baby gift basket Steering System

Titan Industries Ratchet Wrench – 6mm, Model# 12506 Feature

• 6mm wrench
• 72 fine-tooth ratchet design for fast performance
• Less than 5 degree sweep for use in tight spots

Titan Industries Ratchet Wrench – 6mm, Model# 12506 Overviews

This Titan Industries ratchet wrench features chrome vanadium steel construction and a fine tooth ratchet design for fast performance.

*** Product Information and Prices Stored:Mar 05, 2010 03:22:35

ceramic knives

Tracerline – Dye-Lite Coolant/Auto Body Dye, Case of (6) 1 oz. bottles (TP-3900-0601) Overviews

SAS Safety (SAS6533) Large Rubber Solvent Glove Overviews

6533

Glove Rubber Solvent Large

Features and Benefits:

• Large Nitrile Chemical Gloves provide excellent protection for the painter in spraying and mixing operations.
• Nitrile gloves resist puncture and abrasion while protecting against petroleum, solvents, grease, oil and other shop contaminants.
• The standard glove is flock-lined and offers a good feel for the spray gun.

*** Product Information and Prices Stored:Mar 04, 2010 00:52:03

Grilles & Grille Guards